Dell OpenManage Server Administrator Version 5.1 Manual de usuario descargar pdf (Pagina 144)

144 Using the Storage Management Service

Example Syntax

The omconfig command syntax for rescanning all controllers on the system does not require that you

specify a controller ID. To do a global rescan of all controllers, enter the following:

omconfig storage globalinfo action=globalrescan

NOTE: Global rescan is not supported on non-RAID SCSI and SAS controllers. You must reboot the system before

Storage Management can see configuration changes on non-RAID SCSI controllers.

omconfig Controller Commands

The following sections provide the omconfig command syntax required to execute controller tasks.

NOTICE: The omconfig storage controller action=resetconfig controller=id resets the controller configuration.

Resetting the controller configuration permanently destroys all data on all virtual disks attached to the controller.

If the system or boot partition resides on these virtual disks, it will be destroyed.

Table 8-16. omconfig Controller Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage controller

action=rescan controller=id

action=globalrescan

action=enablealarm controller=id

action=disablealarm controller=id

action=quietalarm controller=id

action=testalarm controller=id

action=resetconfig controller=id [force=yes]

action=createvdisk controller=id raid=<c| r0| r1| r1c| r5| r10|

r50> size=<number | max | min> pdisk=<PDISKID>

[stripesize=< 2kb| 4kb| 8kb| 16kb| 32kb| 64kb| 128kb>]

[cachepolicy=<d | c>] [readpolicy=<ra| nra| ara| rc| nrc>]

[writepolicy=<wb | wt | wc | nwc | fwb>] [name=<string>]

[spanlength=<n>]

action=setrebuildrate controller=id

rate=<0 to 100>

action=set/jointfilesconvert/101683/bgirate controller=id

rate=<0 to 100 >

action=setreconstructrate controller=id

rate=<0 to 100>

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 221 222

Sin comentarios

Dell OpenManage Server Administrator Version 5.1 Manual de usuario Pagina 144