Dell OpenManage Server Administrator Version 5.1 Manual de usuario descargar pdf (Pagina 176)

176 Using the Storage Management Service

omconfig Connector Commands

The following sections provide the omconfig command syntax required to execute connector tasks.

omconfig Rescan Connector

Use the following omconfig command to rescan a controller connector. This command rescans all

connectors on the controller and is therefore similar to performing a controller rescan.

NOTE: This command is not supported on SAS controllers.

Complete Syntax

omconfig storage connector action=rescan controller=id connector=id

where id is the controller ID and the connector ID as reported by the omreport command. To obtain

these values, enter omreport storage controller to display the controller IDs and then enter omreport

storage connector controller=ID to display the IDs for the connectors attached to the controller.

Example Syntax

For example, to rescan connector 2 on controller 1, enter:

omconfig storage connector action=rescan controller=1 connector=2

omconfig Enclosure Commands

The following sections provide the omconfig command syntax required to execute enclosure tasks.

Table 8-25. omconfig Connector Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage connector

action=rescan controller=id connector=id

Table 8-26. omconfig Enclosure Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage enclosure

action=enablealarm controller=id enclosure=<ENCLOSUREID>

action=disablealarm controller=id enclosure=<ENCLOSUREID>

action=enablests

action=disablests

action=setassettag controller=id enclosure=<ENCLOSUREID>

assettag=<string>

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 221 222

Sin comentarios

Dell OpenManage Server Administrator Version 5.1 Manual de usuario Pagina 176