Dell OpenManage Server Administrator Version 5.1 Manual de usuario descargar pdf (Pagina 180)

180 Using the Storage Management Service

omconfig Set Temperature Probe Thresholds

Use the following omconfig command syntax to set the minimum and maximum warning temperature

thresholds for a specified temperature probe.

NOTE: This command is not supported on SAS controllers.

Complete Syntax

omconfig storage enclosure action=settempprobes controller=id

enclosure=<ENCLOSUREID> index=id minwarn=n maxwarn=n

where id is the controller ID and the temperature probe ID. The <ENCLOSUREID> variable specifies

the enclosure.

In this syntax, “n” is a user-specified value for the temperature in Celsius.

Example Syntax

For example, you may want to specify the minimum and maximum warning thresholds for temperature

probe 3 to 10 and 40

° Celsius.

Example for SCSI, SATA, and ATA Controllers:

In this example, temperature probe 3 resides in the enclosure attached to connector 2 on controller 1.

To set the temperature probe thresholds to 10 and 40

° Celsius, enter:

omconfig storage enclosure action=settempprobes controller=1

enclosure=2 index=3 minwarn=10 maxwarn=40

omconfig Reset Temperature Probe Thresholds

Use the following omconfig command syntax to reset the minimum and maximum warning temperature

thresholds back to their default values.

NOTE: This command is not supported on SAS controllers.

Complete Syntax

omconfig storage enclosure action=resettempprobes controller=id

enclosure=<ENCLOSUREID> index=id

where id is the controller ID and the temperature probe ID. The <ENCLOSUREID> variable specifies

the enclosure.

Example Syntax

For example, you may want to reset the thresholds for temperature probe 3 to the default values.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 221 222

Sin comentarios

Dell OpenManage Server Administrator Version 5.1 Manual de usuario Pagina 180