Dell OpenManage Server Administrator Version 5.1 Manual de usuario descargar pdf (Pagina 164)

164 Using the Storage Management Service

omconfig Format Virtual Disk

Use the following omconfig command syntax to format a virtual disk.

Complete Syntax

omconfig storage vdisk action=format controller=id vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these

values, enter omreport storage controller to display the controller IDs and then enter omreport storage

vdisk controller=ID to display the IDs for the virtual disks attached to the controller.

Example Syntax

For example, to format virtual disk 4 on controller 1, enter:

omconfig storage vdisk action=format controller=1 vdisk=4

omconfig Reconfiguring Virtual Disks

You can reconfigure a virtual disk in order to change the virtual disk’s RAID level or increase its size by

adding physical disks. On some controllers, you can also remove physical disks.

Complete Syntax

omconfig storage vdisk action=reconfigure controller=id vdisk=id

raid=<c| r0| r1| r1c| r5| r10> size=<size> pdisk=<PDISK>

Example Syntax

For example, to reconfigure virtual disk 4 to a size of 800 MB, use RAID 5 and physical disks 0 through 3

on connector 0 of controller 1. On a SAS controller, the physical disks reside in enclosure 2.

Example for SCSI, SATA, and ATA Controllers:

In this example, enter:

omconfig storage vdisk action=reconfigure controller=1 vdisk=4 raid=

r5 size=800m pdisk=0:0,0:1,0:2,0:3

Example for SAS Controllers:

In this example, enter:

omconfig storage vdisk action=reconfigure controller=1 vdisk=4 raid=

r5 pdisk=0:2:0,0:2:1,0:2:2,0:2:3

omconfig Change Virtual Disk Policy

Use the following omconfig command syntax to change a virtual disk’s read, write, or cache policy.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 221 222

Sin comentarios

Dell OpenManage Server Administrator Version 5.1 Manual de usuario Pagina 164