Dell OpenManage Server Administrator Version 5.1 Manual de usuario descargar pdf (Pagina 174)

174 Using the Storage Management Service

Complete Syntax

omconfig storage pdisk action=cancelclear controller=id pdisk=<PDISKID>

where id is the controller ID. The <PDISK> variable specifies the physical disk.

To obtain these values, enter omreport storage controller to display the controller IDs and then enter

omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller.

Example Syntax

In this example, you want to cancel the clear of physical disk 3 on connector 0 of controller 1. On a SAS

controller, the physical disk resides in enclosure 2.

Example for SAS Controllers:

To cancel the clear of the physical disk described in this example, enter:

omconfig storage pdisk action=cancelclear controller=1 pdisk=0:2:3

omconfig Battery Commands

The following sections provide the omconfig command syntax required to execute battery tasks.

omconfig Recondition Battery

Use the following omconfig command to recondition a controller battery. For more information on

batteries and the recondition process, see the online help.

Complete Syntax

omconfig storage battery action=recondition controller=id battery=id

where id is the controller ID and battery ID as reported by the omreport command. To obtain this value,

enter omreport storage controller to display the controller IDs and then enter omreport storage battery

controller=ID to display the ID for the controller battery.

Table 8-24. omconfig Battery Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage battery

action=recondition controller=id battery=id

action=startlearn controller=id battery=id

action=delaylearn controller=id battery=id

days=d hours=h

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 221 222

Sin comentarios

Dell OpenManage Server Administrator Version 5.1 Manual de usuario Pagina 174