Dell OpenManage Server Administrator Version 5.1 Manual de usuario descargar pdf (Pagina 59)

omconfig: Managing Components Using the Instrumentation Service 59

omconfig chassis bmc

NOTE: This command will be phased-out in future releases. It will be replaced by the command omconfig chassis

remoteaccess.

Use the omconfig chassis bmc command to configure:

• The BMC on a local area network (LAN)

• The serial port for BMC

• The BMC on a serial over LAN connection

• Terminal settings for the serial port

• Advanced settings for a serial over LAN connection

• Information on a BMC user

NOTE: You have to enter the user ID to configure user information.

Ty p e :

omconfig chassis bmc

attribute=uausb setting=on | backonly | off on: Enables the user-accessible USB port(s)

backonly: Enables only the user accessible

USB port(s) at the back of the system.

off: Disables the user-accessible USB port(s).

attribute=usb setting=enabled | disabled enabled: Enables the USB port(s).

disabled: Disables the USB port(s).

NOTE: Depending on your system’s hardware, only

one of the two attributes usb and usbb is available

for configuring the USB port(s).

attribute=usbb setting=enabled |

enabledwithbios| disabled

enabled: Enables the USB port(s) during system

boot, without BIOS support.

enabledwithbios: Enables the USB port(s) during

the system boot, with BIOS support.

disabled: Disables the USB port(s) during system

boot.

NOTE: Depending on your system’s hardware, only

one of the two attributes usb and usbb is available

for configuring the USB port(s).

Table 4-2. BIOS Setup (continued)

name=value pair 1

attribute=

name=value pair 2

setting=

Description

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 221 222

Sin comentarios

Dell OpenManage Server Administrator Version 5.1 Manual de usuario Pagina 59