Dell Force10 S25-01-GE-24P Guía de instalación descargar pdf (Pagina 31)

Force10 Node Manager Guide, version 1.5.0 31

Figure 10 Selection Example

Labels, Status Colors, and Indicator LEDs

Force10 uses labels, status colors, and simulations of light-emitting diodes (LEDs) in Node Manager to

communicate information about a chassis and how it is functioning.

Labels

Node Manager uses labels extensively to identify interface components. These labels appear in the same

location on the interface as they do on the actual component in the chassis. See Figure 11 for an example

of the labels on a component:

Figure 11 Labeling Example

Status Colors and Indicator LEDs

The Node Manager uses the same status colors as used by the E-Series to communicate the operational

status of each component. The general meaning of each status color appears in Table 4. For more

information about these colors, please see Appendix B, Alarms, on page 117.

Table 4 Node Manager Colors and their Meaning

Color Example Meaning

Green The device is operational and functioning.

Amber The device is active but a serious condition or fault exists.

Red The device is active but a hardware failure, temperature

problem or other serious condition exists.

Unlit This can be one of several issues. The device:

• has been shut down administratively in Node Manager

• is in standby mode

• has no electrical power

• has a critical temperature condition or other problem

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 123 124

Sin comentarios

Dell Force10 S25-01-GE-24P Guía de instalación Pagina 31