Dell Force10 S25-01-GE-24P Guía de instalación descargar pdf (Pagina 53)

Force10 Node Manager Guide, version 1.5.0 53

Shutting Down RPM Ports

To shut down a RPM port:

3 Enter your selections. You have these options:

Field Name Usage

Description Enables you to enter a descriptive text for the management port.

IP Address Allows you to assign an IP address to the management port.

Netmask Enables you to assign an IP address mask to the management port.

Speed Sets the speed of the management port. The available list options are:

• 10 Mbps: Ten megabits per second.

• 100 Mbps:100 megabits per second.

• Auto: Node Manager sets the speed to the maximum the RPM

permits.

Duplex Sets the mode of the management port. The available list options are:

• half: Sets the management interface to transmit only in one

direction.

• full: Sets the management interface to transmit in both directions.

4 Click Apply to make your change. Click Reset to reload the default settings.

5 Click OK or Close to exit.

Warning: If you use this feature to shut down the active RPM port and you do not have a second

RPM installed for failover, you cannot access the chassis from Node Manager or from within Telnet

to re-enable it. If you shut down the active port on a chassis with only one RPM, the only way you

can restart it is to reboot the chassis.

Step Icon Task

1 Right-click the icon for the RPM’s management port. Node Manager displays a pop-up

menu of available options.

Step Icon Task

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 123 124

Sin comentarios

Dell Force10 S25-01-GE-24P Guía de instalación Pagina 53