Dell Computer Drive CMC 3.2 Manual de usuario descargar pdf (Pagina 273)

iDRAC6 and CMC Property Database Group and Object Descriptions 273

FILE LOCATION:

C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac

DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY

cfgNetTuningNic100MB (Read/Write)

cfgNetTuningNicFullDuplex (Read/Write)

cfgNetTuningNicMtu (Read/Write)

NOTE: IPv6 requires a minimum MTU of 1280. If IPv6 is enabled, and

cfgNetTuningMtu is set to a lower value, the CMC uses an MTU of 1280.

cfgSensorRedundancy

This group is applicable only for iDRAC6 and is used to set the power supply

redundancy.

The following sections provides information about the objects in the

cfgSensorRedundancy group.

NOTE: The cfgSensorRedundancy object group is applicable only for iDRAC6 on

Rack and Tower Servers and not for iDRAC6 Enterprise on Blade Servers.

Description Specifies the speed to use for the RAC NIC. This property is not

used if the cfgNetTuningNicAutoNeg is set to 1 (enabled).

Legal Values 0 (10 MBit)

1 (100 MBit)

Default 1

Description Specifies the duplex setting for the RAC or CMC NIC. This

property is used only if the cfgNetTuningNicAutoNeg is set to 0

(disabled).

Legal Values 0 (Half Duplex)

1 (Full Duplex)

Default 1

Description The size in bytes of the maximum transmission unit used by

iDRAC6 or CMC NIC.

Legal Values 576 – 1500

Default 1500

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 291 292

Sin comentarios

Dell Computer Drive CMC 3.2 Manual de usuario Pagina 273