Dell Computer Drive CMC 3.2 Manual de usuario descargar pdf (Pagina 60)

60 RACADM Subcommand Details

• Query the current status of the firmware update process for a particular

module.

racadm fwupdate -s -m <module>

• Cancel a firmware update in progress.

racadm fwupdate -c

• Upload a firmware image from the client and start the firmware update.

racadm fwupdate -p -u -d firmimg.cmc

NOTE: The fwupdate command generates an error when used on the extension

slot of a multi-slot server.

NOTE: Image path length for Remote RACADM is 256 characters and for local

RACADM, it is 64 characters.

Output

Displays a message indicating the operation that is being performed.

Examples

• racadm fwupdate -g -u - a 143.166.154.143 -d

<path>

In this example, the

-g

option tells the firmware to download the firmware

update file from a location (specified by the

-d

option) on the TFTP server

at a specific IP address (specified by the

-a

option). After the image file is

downloaded from the TFTP server, the update process begins. When

completed, iDRAC6 is reset.

• racadm fwupdate -s

This option reads the current status of the firmware update.

NOTE: Firmware update from local racadm (using -p -u -d options) is not supported

on linux OS.

NOTE: For CMC, these commands specifically apply to an active-CMC update.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 291 292

Sin comentarios

Dell Computer Drive CMC 3.2 Manual de usuario Pagina 60