Dell PowerConnect W Clearpass 100 Software Guía de usuario Pagina 115

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 296
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 114
l A direct wired ISP connection or a wireless uplink.
l One or more DHCP pools for private VLANs.
l One downlink port configured on a private VLAN without authentication for connecting to slave APs. Ensure that
the downlink port configured in a private VLAN is not used for any wired client connection. Other downlink ports
can be used for connecting to the wired clients.
The following figure illustrates a hierarchical deployment scenario:
Figure 38 Hierarchical Deployment
Configuring Wired Bridging on Ethernet 0
Instant supports wired bridging on the Ethernet 0 port of an OAW-IAP.
Enabling wired bridging on this port of an OAW-IAP makes the port available as a downlink wired bridge
and allows client access through the port. You can also use the port to connect a wired device when a 3G
uplink is used.
You can configure support for wired bridging on the Ethernet 0 port of an OAW-IAP using Instant UI or CLI.
In the Instant UI
To configure Ethernet bridging:
1. In the Access Points tab, click the OAW-IAP to modify. The edit link is displayed.
2. Click the edit link. The edit window for modifying OAW-IAP details is displayed.
3. Click the Uplink tab.
4. Select Enable from the Eth0 Bridging drop-down menu.
5. Click OK.
6. Reboot the OAW-IAP.
AOS-W Instant 6.2.1.0-3.3| User Guide Wired Profiles | 115
Vista de pagina 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 295 296

Comentarios a estos manuales

Sin comentarios