Dell PowerConnect W Clearpass 100 Software Guía de usuario descargar pdf (Pagina 82)

8282 | Wireless Network Profiles

Dell PowerConnect W-Series Aruba Instant 6.2.1.0-3.3 | User Guide

l Voice WMM share — Allocates bandwidth for voice traffic generated from the incoming and outgoing voice

communication.

In a non-WMM or hybrid environment, where some clients are not WMM-capable, you can allocate higher

values for Best effort WMMshare and Voice WMM share to allocate a higher bandwidth to clients

transmitting best effort and voice traffic.

e. Under Miscellaneous, specify the following parameters:

l Set Content filtering to Enabled to route all DNS requests for the non-corporate domains to OpenDNS on

this network.

l Select a value for Band to specify the band at which the network transmits radio signals. You can set the

band to 2.4 GHz, 5 GHz, or All. The All option is selected by default.

l Specify the time for Inactivity timeout. If a client session is inactive for the specified duration, the session

expires and the users are required to log in again. The minimum value is set to 60 seconds and the default

value is 1000 seconds.

l Select the Hide SSID check box if you do not want the SSID (network name) to be visible to users.

l Select Disable SSID to disable the SSID. On selecting this check box, the SSID is disabled, but not

removed from the network. By default, all SSIDs are enabled.

l Select the Can be used without Uplink if you do not want to SSID profile to use uplink.

l Specify the maximum number of clients that can be configured for each BSSID on a WLAN in the Max

clients threshold text box. You can specify a value within the range of 0 to 255. The default value is 64.

l Specify a threshold value in the Local probe request threshold text box to limit the number of incoming

probe requests. When a client sends a broadcast probe request frame to search for all available SSIDs,

this option controls system response for this network profile and ignores probe requests if required. You

can specify a Received signal strength indication (RSSI) value within range of 0 to 100 dB.

5. Click Next to configure VLAN settings. For more information, see Configuring VLAN Settings for a WLAN SSID

Profile on page 83.

In the CLI

To configure WLAN settings for an SSID profile:

(Instant Access Point)(config)# wlan ssid-profile <SSID-Name>

(Instant Access Point)(SSID Profile<name>)# essid <ESSID-name>

(Instant Access Point)(SSID Profile<name>)# type {<Employee> | <Voice>| <Guest>}

(Instant Access Point)(SSID Profile<name>)# broadcast-filter <type>

(Instant Access Point)(SSID Profile<name>)# dtim-period <number-of-beacons>

(Instant Access Point)(SSID Profile<name>)# multicast-rate-optimization

(Instant Access Point)(SSID Profile<name>)# dynamic-multicast-optimization

(Instant Access Point)(SSID Profile<name>)# dmo-channel-utilization-threshold

(Instant Access Point)(SSID Profile<name>)# a-max-tx-rate <rate>

(Instant Access Point)(SSID Profile<name>)# a-min-tx-rate <rate>

(Instant Access Point)(SSID Profile<name>)# g-max-tx-rate <rate>

(Instant Access Point)(SSID Profile<name>)# g-min-tx-rate <rate>

(Instant Access Point)(SSID Profile<name>)# bandwidth-limit <limit>

(Instant Access Point)(SSID Profile<name>)# per-user-bandwidth-limit <limit>

(Instant Access Point)(SSID Profile<name>)# air-time-limit <limit>

(Instant Access Point)(SSID Profile<name>)# wmm-background-share <percentage-of-traffic_share>

(Instant Access Point)(SSID Profile<name>)# wmm-best-effort-share<percentage-of-traffic-share>

(Instant Access Point)(SSID Profile<name>)# wmm-video-share <percentage-of-traffic_share>

(Instant Access Point)(SSID Profile<name>)# wmm-voice-share <percentage-of-traffic_share>

(Instant Access Point)(SSID Profile<name>)# rf-band {<2.4>|<5.0>|<all>}

(Instant Access Point)(SSID Profile<name>)# content-filtering

(Instant Access Point)(SSID Profile<name>)# hide-ssid

(Instant Access Point)(SSID Profile<name>)# inactivity-timeout <interval>

(Instant Access Point)(SSID Profile<name>)# work-without-uplink

(Instant Access Point)(SSID Profile<name>)# local-probe-req-thresh <threshold>

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 295 296

Dell PowerConnect W Clearpass 100 Software Guía de usuario Pagina 82

Comentarios a estos manuales

Dell PowerConnect W Clearpass 100 Software Guía de usuario Pagina 82

Comentarios a estos manuales

Relacionado con productos y manuales para Software Dell PowerConnect W Clearpass 100 Software