
AOS-W Instant 6.2.1.0-3.3| User Guide Real Time Location Server Configuration | 249
Chapter 25
Real Time Location Server Configuration
This chapter describes the procedure for configuring Real Time Location Server (RTLS).
Configuring RTLS
AOS-W Instant supports the real-time tracking of devices when integrated with OmniVista 3600 , Ekahau Real Time
Location Server, Nearbuy Real Time Location Server or Aeroscout Real Time Location Server. With the help of the
RTLS, the devices can be monitored in real-time or through history.
You can configure RTLS using Instant UI or CLI.
In the Instant UI
To configure RTLS:
1. Click the More>Services link at the top right corner of the Instant main window. The Services window is
displayed.
2. Click the RTLS tab. The following figure shows the contents of the RTLS tab.
Figure 91 RTLS Window
3. Select the Aruba RTLS check box to integrate Instant with OmniVista 3600 , Ekahau Real Time Location
Server, and Nearbuy Real Time Location Server.
4. Specify the IP address and port to which the location reports must be sent.
5. Specify the shared secret key in the Passphrase text box.
6. Specify the frequency at which packets are sent to the server. The default value is 5 seconds.
7. Select the Aeroscout check box to send the RFID tag information to an AeroScout RTLS. Specify the IP
address and port number of the AeroScout server, to which location reports must be sent.
8. Select the Include unassociated stations check boxes to send mobile unit reports to the Aeroscout and the
Aruba RTLS servers on the client stations not associated to any OAW-IAP (unassociated stations).
In the CLI
To configure AirWave RTLS:
Comentarios a estos manuales