Dell PowerConnect W Clearpass 100 Software Guía de usuario Pagina 268

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 296
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 267
268268 | OAW-IAP Management
Dell PowerConnect W-Series Aruba Instant 6.2.1.0-3.3 | User Guide
3. Select Standalone AP from the drop-down list.
4. Select the Access Point from the drop-down list.
5. Click Convert Now to complete the conversion. The OAW-IAP now operates in the standalone mode.
Converting an OAW-IAP using CLI
To an convert an OAW-IAP:
(Instant Access Point)# convert-aos-ap <mode> <controller-IP-address>
Resetting a Remote AP or Campus AP to an OAW-IAP
The reset button located on the rear of an OAW-IAP can be used to reset the OAW-IAP to factory default settings.
To reset an OAW-IAP, perform the following steps:
1. Power off the OAW-IAP.
2. Press and hold the reset button using a small and narrow object such as a paperclip.
3. Power on the OAW-IAP without releasing the reset button. The power LED flashes within 5 seconds indicating
that the reset is completed.
4. Release the reset button. The OAW-IAP reboots with the factory default settings.
All APs have a reset button, except OAW-IAP175P/175AC. Contact Alcatel-Lucent support for resetting
these OAW-IAPs.
Rebooting the OAW-IAP
If you encounter any problem with the OAW-IAPs, you can reboot all OAW-IAPs or a selected OAW-IAPs in a
network using the Instant UI. To reboot an OAW-IAP:
1. Click the Maintenance link. The Maintenance window appears.
2. Click the Reboot tab.
Vista de pagina 267
1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 295 296

Comentarios a estos manuales

Sin comentarios