Dell PowerConnect W Clearpass 100 Software Guía de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 296
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
5656 | AOS-W Instant User Interface
Dell PowerConnect W-Series Aruba Instant 6.2.1.0-3.3 | User Guide
Type
Code
Description Details Corrective Actions
10010-
5
Maximum capacity
reached on OAW-IAP
The OAW-IAP has reached
maximum capacity and
cannot accommodate any
more clients.
Consider expanding capacity by installing
additional OAW-IAPs or balance load by
relocating OAW-IAPs.
10020-
6
Invalid MAC Address The OAW-IAP cannot
authenticate this client
because the client's MAC
address is not valid.
This condition may be indicative of a
misbehaving client. Try to locate the client
device and check its hardware and software.
10030-
7
Client blocked due to
repeated authentication
failures
The OAW-IAP is temporarily
blocking the 802.1X
authentication request from
this client, because the
credentials provided are
rejected by the RADIUS
server too many times.
Identify the client and check its 802.1X
credentials.
10030-
8
RADIUS server
connection failure
The OAW-IAP cannot
authenticate this client
using 802.1X, because the
RADIUS server did not
respond to the
authentication request.
If the OAW-IAP is using the internal RADIUS
server, recommend checking the related
configuration as well as the installed certificate
and passphrase.
If the OAW-IAP is using an external RADIUS
server, check if there are any issues with the
RADIUS server and try connecting again.
10030-
9
RADIUS server
authentication failure
The OAW-IAP cannot
authenticate this client
using 802.1X , because the
RADIUS server rejected the
authentication credentials
(password and so on)
provided by the client.
Ascertain the correct authentication credentials
and log in again.
10041-
0
Integrity check failure in
encrypted message
The OAW-IAP cannot
receive data from this client
, because the integrity
check of the received
message (MIC) has failed.
Check the encryption setting on the client and
on the OAW-IAP.
10051-
1
DHCP request timed out This client did not receive a
response to its DHCP
request in time.
Check the status of the DHCP server in the
network.
Table 12: Alerts List
IDS
The IDSlink displays a list of foreign APs and foreign clients that are detected in the network. It consists of the
following sections:
l Foreign Access Points Detected Lists the APs that are not controlled by the Virtual Controller. The following
information is displayed for each foreign AP:
n MAC address— Displays the MAC address of the foreign AP.
n Network Displays the name of the network to which the foreign AP is connected.
n Classification Displays the classification of the foreign AP, for example, Interfering OAW-IAP or Rogue
OAW-IAP.
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 295 296

Comentarios a estos manuales

Sin comentarios