Dell PowerConnect W-Airwave 8.0 Manual de usuario descargar pdf (Pagina 162)

4. Complete additional settings on the APs/Devices > Manage page, to include H-REAP, certificates, radio settings,

and network settings. Table 85 describes many of the possible fields.

For complete listing and discussion of settings applicable only to

Dell Networking W-Series

devices, see the Dell

Networking W-Series

Device Configuration Guide.

Setting Default Device Type Description

Mesh Mode Mesh AP Mesh Devices

Drop-down menu specifies the mesh role for the AP as

shown:

l Mesh AP —The AP will act like a mesh client. It will use

other APs as its uplink to the network.

l Portal AP —The AP will become a portal AP. It will use a

wired connection as its uplink to the network and serve it

over the radio to other APs.

l Remote Portal AP —The AP will become a remote portal

AP. It will use a wireless connection as its uplink to the

network and serve it over the radio to other APs.

l None —The AP will act like a standard AP. It will not

perform meshing functions.

Mesh Mobility Static Mesh Devices

Select Static if the AP is static, as in the case of a device

mounted on a light pole or in the ceiling. Select Roaming if

the AP is mobile. Two examples would be an AP mounted in

a police car or utility truck.

Receive Antenna Diversity Cisco

Drop-down menu for the receive antenna provides three

options:

Diversity —Device will use the antenna that receives the best

signal. If the device has two fixed (non-removable)

antennas, the Diversity setting should be used for both

receive and transmit antennas.

Right —If your device has removable antennas and you

install a high-gain antenna on the device's right connector

(the connector on the right side when viewing the back

panel of the device), use this setting for receive and transmit.

Left —If your device has removable antennas and you install

a high-gain antenna on the device's left connector, use this

setting for both receive and transmit.

Transmit

Antenna

Diversity Cisco See description in Receive Antenna above.

Antenna

Diversity

Primary Only Symbol 4131

Drop-down menu provides the following options:

Full Diversity—The AP receives information on the antenna

with the best signal strength and quality. The AP transmits

on the antenna from which it last received information.

Primary Only—The AP transmits and receives on the primary

antenna only. Secondary Only: The AP transmits and

receives on the secondary antenna only.

Rx Diversity—The AP receives information on the antenna

with the best signal strength and quality. The AP transmits

information on the primary antenna only.

Table 85:

Additional Settings

Dell Networking W-AirWave 8.0 | User Guide Discovering, Adding, and Managing Devices | 162

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 376 377

Comentarios a estos manuales

Sin comentarios

Dell PowerConnect W-Airwave 8.0 Manual de usuario Pagina 162

Comentarios a estos manuales

Relacionado con productos y manuales para Software Dell PowerConnect W-Airwave 8.0