Dell PowerConnect W-Airwave 8.0 Manual de usuario descargar pdf (Pagina 52)

52 | Configuring AirWave Dell Networking W-AirWave 8.0 | User Guide

Field Default Description

Secondary Server

Hostname/IP Address

N/A Enter the IP address or the hostname of the secondary RADIUS server.

Secondary Server Port

(1-65535)

1812 Enter the TCP port for the secondary RADIUS server.

Secondary Server

Secret

N/A Enter the shared secret for the secondary RADIUS server.

Confirm Secondary

Server Secret

N/A Re-enter the secondary server secret.

Table 23:

AMP Setup > Authentication Fields and Default Values for RADIUS Authentication (Continued)

3. Select Save to retain these configurations, and continue with additional steps in the next procedure.

Integrating a RADIUS Accounting Server

AirWave checks the local username and password before checking with the RADIUS server. If the user is found locally, the

local password and role apply. When using RADIUS, it’s not necessary or recommended to define users on the AirWave

server. The only recommended user is the backup admin, in case the RADIUS server goes down.

Optionally, you can configure RADIUS server accounting on AMP Setup > RADIUS Accounting. This capability is not

required for basic AirWave operation, but can increase the user-friendliness of AirWave administration in large networks.

Figure 23 illustrates the settings of this optional configuration interface.

Perform the following steps and configurations to enable AirWave to receive accounting records from a separate

RADIUS server. Figure 23 illustrates the display of RADIUS accounting clients already configured, and Figure 24

illustrates the Add RADIUS Accounting Client page.

Figure 23:AMP Setup > RADIUS Accounting Page Illustration

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 376 377

Sin comentarios

Dell PowerConnect W-Airwave 8.0 Manual de usuario Pagina 52