Dell PowerConnect W-Airwave 8.0 Manual de usuario descargar pdf (Pagina 51)

Specifying the Authentication Priority

To specify the authentication priority for this AirWave, locate the Authentication Priority section in AMP Setup >

Authentication, and select either Local or Remote as the priority.

If Local is selected, then remote will be attempted if a user is not available. If Remote is selected, then the local

database is searched if remote authentication fails. The order of remote authentication is RADIUS first, followed by

TACACS, and finally LDAP.

Select Save if you are finished or follow the next procedure to configure RADIUS, TACACS+, and LDAP

Authentication options.

Configuring RADIUS Authentication and Authorization

For RADIUS capability, you must configure the IP/Hostname of the RADIUS server, the TCP port, and the server shared

secret. Perform these steps to configure RADIUS authentication:

1. Go to the AMP Setup > Authentication page. This page displays current status of RADIUS. Figure 22 illustrates this

page.

Figure 22:AMP Setup > Authentication Page Illustration for RADIUS

2. Select No to disable or Yes to enable RADIUS authentication. If you select Yes, several new fields appear. Complete

the fields described in Table 23.

Field Default Description

Primary Server

Hostname/IP Address

N/A Enter the IP address or the hostname of the primary RADIUS server.

Primary Server Port (1-

65535)

1812 Enter the TCP port for the primary RADIUS server.

Primary Server Secret N/A

Specify and confirm the primary shared secret for the primary RADIUS

server.

Confirm Primary Server

Secret

N/A Re-enter the primary server secret.

Table 23:

AMP Setup > Authentication Fields and Default Values for RADIUS Authentication

Dell Networking W-AirWave 8.0 | User Guide Configuring AirWave | 51

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 376 377

Sin comentarios

Dell PowerConnect W-Airwave 8.0 Manual de usuario Pagina 51