Dell PowerConnect W-Airwave 8.0 Manual de usuario descargar pdf (Pagina 93)

93 | Configuring and Using Device Groups Dell Networking W-AirWave 8.0 | User Guide

Figure 42:Groups > Security Page Illustration

Setting Default Description

VLANs Section

VLAN Tagging and

Multiple SSIDs

Enabled

This field enables support for VLANs and multiple SSIDs on the wireless

network. If this setting is enabled, define additional VLANs and SSIDs on

the Groups > SSIDs page. Refer to "Configuring Group SSIDs and

VLANs" on page 96. If this setting is disabled, then you can specify the

Encryption Mode in the Encryption section that displays. Refer to

"Groups > Security Encryption Mode settings" on page 95 for information

on configuring Encryption.

Management VLAN ID Untagged

This setting sets the ID for the management VLAN when VLANs are

enabled in AirWave . This setting is supported only for the following

devices:

l Proxim AP-600, AP-700, AP-2000, AP-4000

l Avaya AP-3, Avaya AP-7, AP-4/5/6, AP-8

l ProCurve520WL

General Section

Create Closed Network No

If enabled, the APs in the Group do not broadcast their SSIDs.

NOTE: Creating a closed network will make it more difficult for intruders

to detect your wireless network.

Block All Inter-client

Communication

If enabled, this setting blocks client devices associated with an AP from

communicating with other client devices on the wireless network.

NOTE: This option may also be identified as PSPF (Publicly Secure

Packet Forwarding), which can be useful for enhanced security on public

wireless networks.

EAP Options Section

Table 54:

Groups > Security Page Fields and Default Values

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 376 377

Sin comentarios

Dell PowerConnect W-Airwave 8.0 Manual de usuario Pagina 93