Dell PowerConnect W-Airwave 7.1 Manual de usuario descargar pdf (Pagina 104)

104 | Configuring and Using Device Groups in AWMS Dell PowerConnect W AirWave 7.1 | User Guide

10. To configure settings specific to Proxim 4900M, locate the Proxim 4900M section and define the required

fields. Table 67 describes the settings and default values.

Table 66 Groups > LWAPP

APs, Proprietary Settings Fields and Default Values

Setting Default Description

Load Balancing No If enabled, this setting allows client devices associating to an AP with two radio cards

to determine which card to associate with, based on the load (# of clients) on each

card.

NOTE: This fea

ture is only available when two 802.11b wireless cards are used in an

AP-2000.

Interference Robustness No If enabled, this option will fragment packets greater

than 500 bytes in size to reduce

the impact of radio frequency interference on wireless data throughput.

Distance Between APs Large This setting adjusts the receiver sensitivity. Reducing receiver sensitivity from its

maximum may help reduce the amount of crosstalk between wireless stations to

better support roaming users. Reducing the receiver sensitivity, user stations will be

more likely to connect with the nearest access point.

802.11g Operational

Mod

802.11b

+802.11g

This setting sets the operational mode of all g radios in the group to either b only, g

only or b + g.

802.11a/jointfilesconvert/79670/bg Operational

Mode

802.11b

+802.11g

This setting sets the operational mode of all a/b/g radios in the group to either a only, b

only, g only or b + g.

802.11b Transmit Rate Auto

Fallback

This setting specifies the minimum transmit rate required for the AP to permit a user

device to associate.

802.11g Transmit Rate Auto

Fallback

This setting specifies the minimum transmit rate requ

ired for the AP to permit a user

device to associate.

802.11a Transmit Rate Auto

Fallback

This setting specifies the minimum transmit rate required for the AP to permit a user

device to associate.

Rogue Scanning Yes If enabled, any ORiNOCO, or Avaya access points in the group (with the appropriate

firmware) will passively scan for rogue access points at the specified interval. This

rogue scan will not break users' association to the network.

NOTE: This fea

ture can affect the data performance of the access point.

Rogue Scan Interval 15 minutes If rogue scanning is enabled, this setting contr

ols the frequency with which scans are

conducted (in minutes). Frequent scans provide the greatest security, but AP

performance and throughput available to user devices may be impacted modestly

during a rogue scan.

Table 67 Proxim 4900, Proprietary Settings Fields and Default Values

Setting Default Description

4.9GHz Public Safety

Channel Bandwidth

20 This setting specifies the channel bandwidth for the 4.9 GHz radio. It is only applicable

if you are running the 802.11a/4.9GHz radio in 4.9GHz mode.

802.11a/4.9GHz Public

Safety Opera

tional Mode

802.11a This setting specifies if the AP will run the 802.11a/4.9GHz radio in 802.11a mode or in

4.9 GHz mode. Please note that 4.9 GHz is a licensed frequency used for public safety.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 333 334

Comentarios a estos manuales

Sin comentarios

Dell PowerConnect W-Airwave 7.1 Manual de usuario Pagina 104

Comentarios a estos manuales

Relacionado con productos y manuales para Software Dell PowerConnect W-Airwave 7.1