Dell PowerConnect W-Airwave 7.1 Manual de usuario Pagina 141

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 334
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 140
Dell PowerConnect W AirWave 7.1 | User Guide Discovering, Adding, and Managing Devices | 141
Figure 87 Device Setup > Add Page Illustration
2. Click Add. Larg
e numbers of Universal Network Devices can be added from a CSV file by clicking the Import
Devices via CSV link.
3. Enter the name, IP address and read-only SNMP
community string for the device.
4. Select the appropriate group and folder.
5. Click Add. All universal dev
ices are added in Monitor Only mode.
AWMS collects basic information about universal
devices, including name, contact, uptime and location. Once
you have added a universal device, you can view a list of the device's interfaces on the APs/Devices > Manage
page.
By clicking the pencil icon next to an
interface, you can assign it to be non-monitored or monitored as Interface 1
or 2. AWMS collects this information and displays it on the APs/Devices > Monitor interface. AWMS supports
MIB-II interfaces and polls in/out byte counts for up to two interfaces. AWMS also monitors sysUptime.
Assigning Devices to the Ignored Page
There are two ways a device can be assigned to the Ignored page: from the APs/Devices > New page, or from the
APs/Devices > Manage page. The advantage of having the device be designated in this way, as in the case of a
device that is temporarily down for a known reason, is that when you take it off the ignored list, it returns
immediately to the location in AMP where it had resided before it was marked Ignored.
If you choose to ignore devices, they are not be displayed in the APs/Devices > New list if they are discovered
in subsequent scans.
If you choose to delete the device, it will be listed on the APs/Devices > New list if discovered by AWMS in a
subsequent scan.
This procedure provides additional guidelines about using the APs/De
vices > Ignored page. Perform these steps
to further process or return an ignored device to a managed status.
1. To view all devices that are ignored, navigate to t
he APs/Devices > Ignored page, illustrated in Figure 88.
Vista de pagina 140
1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 333 334

Comentarios a estos manuales

Sin comentarios