Dell PowerConnect W-Airwave 7.1 Manual de usuario Pagina 65

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 334
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 64
Dell PowerConnect W AirWave 7.1 | User Guide Configuring AWMS | 65
Integrating a RADIUS Accounting Server
As an optional configuration, AWMS supports RADIUS server accounting. Use the AMP Setup > RADIUS
Accounting page enables this configuration. This capability is not required for basic AWMS operation, but can
increase the user-friendliness of AWMS administration in large networks. Figure 31 illustrates the settings of this
optional configuration interface.
Perform the following steps and configurations to enable
AWMS to receive accounting records from a separate
RADIUS server. Figure 31 illustrates the display of RADIUS accounting cl
ients already configured, and Figure 32
illustrates the Add RADIU
S Accounting Client page.
Figure 31 AMP Setu
p > RADIUS Accounting Page Illustration
Figure 32
AMP Setup > RADIUS > Add RADIUS Accounting Client Page Illustration
1. To specify the RADIUS authentication
server or network, browse to the AMP Setup > RADIUS Accounting
page and click Add, illustrated in Figure 32, and provide the information described in Table 31.
2. Click Add.
What Next?
For additional information about configuring WLAN Gateways or WLAN controllers such as BlueSocket,
ReefEdge, or ProCurve wireless gateways, refer to “Third-Party Security Integration for AWMS” on page305.
Note: AWMS checks the local username and password store before checking with the RADIUS server. If the user is found locally,
the local password and local role apply. When using RADIUS, it is not necessary or recommended to define users on the AWMS
server. The only recommended user is the backup administrator, in the event that the RADIUS server goes down.
Table 31 AMP Setup > Radius Accounting Fields and Default Values
Setting Default Description
Nickname None Sets a user-defined name for the authentication server.
IP/Network None Cites the IP address or DNS Hostname for the authen
tication server if you only want to accept
packets from one device. To accept packets from an entire network enter the IP/Netmask of
the network (for example, 10.51.0.0/24).
(Confirm) Shared
Secret
None Sets the Shared Secret that is used to establish communication between
AWMS and the
RADIUS authentication server.
Vista de pagina 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 333 334

Comentarios a estos manuales

Sin comentarios