
Dell PowerConnect W AirWave 7.1 | User Guide Configuring and Using Device Groups in AWMS | 97
7. Locate the RADIUS Authentication Servers area on the Groups > SSIDS configuration page and define the
settings. Table 58 describes the settings and default values.
8. Click Save when the security settings and
configurations in this procedure are complete.
9. Locate the R
ADIUS Accounting Servers area on the Groups > SSIDS configuration page and define the
settings. Table 59 describes the settings and default values.
Table 57 Groups > SSIDs
> EAP Options Section Fields and Default Values
Setting Default Description
WEP Key Rotation
Interval (seconds)
120 Time (in seconds) between WEP key rotation on the AP.
Cisco TKIP No If enabled, Cisco Temporal Key Integrity Protocol (TKIP) provides per-packet key
mixing, a message integrity check and a re-keying mechanism, thus fixing the flaws of
WEP.
NOTE: TKIP
can only be enabled when EAP-based security is used.
Cisco MIC Disabled If enabled, Cisco Message Integrity Check (MIC)
adds several bytes per packet to
make it more difficult to tamper with the packets.
Table 58 Groups > SSIDs > RADIUS Authentication Servers Fields and Default Values
Setting Default Description
RADIUS
Authentication Server
1-3
(Colubris,
ProCurve420, Proxim
only)
None Drop-down menu to select RADIUS Authentication servers previously entered on
the Group > RADIUS configuration page. These RADIUS servers dictate how
wireless clients authenticate onto the network.
Authentication Profile
N
ame (Proxim Only)
None Sets the Authentication Profile Name for Proxim AP-600, AP-700, AP-2000, AP-4000,
Avaya AP3/4/5/6/7/8 and HP ProCurve 520WL APs.
Authentication Profile
Index (Proxim Only)
None Sets the Authentication Profile Index for Proxim AP-600, AP-700, AP-2000, AP-4000,
Avaya AP3/4/5/6/7/8 and HP ProCurve 520WL APs.
Note: You may need to return to the Security configuration page to configure or reconfigure RADIUS servers.
Table 59 Groups > SSIDs > Radius Accounting Servers Fields and Default Values
Setting Default Description
RADIUS Accounting Server
1-3 (Proxim Only)
None Pull-down menu selects RADIUS Accounting servers previously entered on
the Group > RADIUS configuration page. These RADIUS servers dictate where
the AP sends RADIUS Accounting packets for this SSID/VLAN.
Accounting Profile Name
(Prox
im Only)
None Sets the Accounting Profile Name for Proxim AP-600, AP-700, AP-2000, AP-
4000, Avaya AP3/4/5/6/7/8 and HP ProCurve 520WL APs.
Accounting Profile Index
(Prox
im Only)
None Sets the Accounting Profile Index for Proxim AP-600, AP-700, AP-2000, AP-
4000, Avaya AP3/4/5/6/7/8 and HP ProCurve 520WL APs.
Comentarios a estos manuales