Dell PowerConnect W-Airwave 7.1 Manual de usuario descargar pdf (Pagina 69)

Dell PowerConnect W AirWave 7.1 | User Guide Configuring AWMS | 69

2. If the AP is the Primary or Backup WDS, select Use the AP as Wireless Domain Services.

 Select Priority (set 200 for Primary, 100 for Secondary).

 Configure the Wireless Network Manager (configure the IP address of WLSE).

3. If the AP is Member Only, leave all options unchecked.

4. Navigate to the S

ecurity > Server Manager page.

5. Enter the IP address and Shared Secret

for the ACS server.

6. Click the Ap

ply button.

7. Navigate to the W

ireless Services > WDS > Server Group page.

8. Enter the WDS Group of AP.

9. Select the ACS server in

the Priority 1 drop- down menu.

10. Click the Ap

ply button.

Configuring ACS for WDS Authentication

ACS authenticates all components of the WDS and must be configured first. Perform these steps to make this

configuration.

1. Login to the ACS.

2. Navigate to the Sy

stem Configuration > ACS Certificate Setup page.

3. Install a New Certificate by clicking the Instal

l New Certificate button, or skip to the next step if the

certificate was previously installed.

4. Click the Use

r Setup button in the left frame.

5. Enter the Us

ername that will be used to authenticate into the WDS and click Add/Edit button.

6. Enter the Password th

at will be used to authenticate into the WDS and click the Submit button.

7. Navigate to the Netwo

rk Configuration > Add AAA Client page.

8. Add AP Hostn

ame, AP IP Address, and Community String (for the key).

9. Enter the Password that w

ill be used to authenticate into the WDS and click the Submit button.

For additional and more general inf

ormation about ACS, refer to “Configuring ACS Servers” on page71.

Configuring Cisco WLSE Rogue Scanning

The AMP Setup > WLSE page allows AWMS to integrate with the Cisco Wireless LAN Solution Engine

(WLSE). AWMS can discover APs and gather rogue scanning data from the Cisco WLSE.

Figure 33 illustrates and itemizes the AWMS settings for communication that is en

abled between AWMS and

WLSE.

Figure 33 AMP Setu

p > WLSE > Add WLSE Page Illustration

Perform the following steps for optional

configuration of AWMS for support of Cisco WLSE rogue scanning.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 333 334

Comentarios a estos manuales

Sin comentarios

Dell PowerConnect W-Airwave 7.1 Manual de usuario Pagina 69

Comentarios a estos manuales

Relacionado con productos y manuales para Software Dell PowerConnect W-Airwave 7.1