Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guía de usuario Pagina 295

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 931
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 294
IOV008
Message Chassis manager was unable to put PCIe subsystem into factory mode
Detailed
Description
Chassis manager was unable to put PCIe subsystem into factory mode
Recommended
Response Action
Retry command
Category Configuration
SubCategory IOV = IO Virtualization
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
IOV009
Message Chassis manager unable to reset to factory default or pre-factory defaults.
Detailed
Description
The Chassis manager only executes this function when the chassis is powered down.
Recommended
Response Action
Power down chassis and retry command
Category Configuration
SubCategory IOV = IO Virtualization
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
IOV101
Message PCIE device
arg1
inserted in
arg2arg3
.
295
Vista de pagina 294
1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 930 931

Comentarios a estos manuales

Sin comentarios