Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) El manual del propietario descargar pdf (Pagina 33)

To replace the front bezel, perform the preceding steps in reverse.

Opening and Closing the System



Opening the System

To upgrade or troubleshoot the system, remove the system cover to gain access to internal components.



1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals.



2. Remove the bezel. See Removing and Replacing the Front Bezel.



3. To remove the system cover, rotate the latch release lock on the latch in a counter clockwise direction to the unlocked position. See Figure3-3.



4. Lift up on the latch on top of the system to guide it back and into an offset position. See Figure3-3.



5. Grasp the cover on both sides and carefully lift the cover away from the system.

Figure 3-3. Removing the Cover

key lock

bezel cover

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See

your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against

electrostatic discharge.

CAUTION: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself.

CAUTION: The memory modules can become extremely hot during normal operation. Allow the modules sufficient time to cool before handling.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 80 81

Sin comentarios

Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) El manual del propietario Pagina 33