Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) El manual del propietario Pagina 63

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 81
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 62
Figure 2-1. Main System Setup Program Screen
Table2-2 lists the options and descriptions for the information fields that appear on the main System Setup program screen. For related information, see
System Security Screen Options.
Table 2-2.SystemSetupProgramOptions
NOTE: The options for the System Setup program change based on the system configuration.
NOTE: The System Setup program defaults are listed under their respective options, where applicable.
Option
Description
System Time
Resets the time on the system's internal clock.
System Date
Resets the date on the system's internal calendar.
Memory Information
Displays information related to installed system, video, and redundant memory, including size, type, and speed of memory modules,
system memory test option status, and redundant memory status.
CPU Information
Displays information related to microprocessors (speed, cache size, and so on). See CPU Information Screen."
SATA Port x
Displays type and capacity of drive attached to port x.
Boot Sequence
Determines the order in which the system searches for boot devices during system startup. Available options can include the diskette
drive, CD drive, hard drives, and network. If you have installed a RAC, additional options, such as virtual floppy and virtual CD-ROM,
may be present.
NOTE: System boot is not supported from an external device attached to a SAS or SCSI adapter. See support.dell.com for the latest
support information about booting from external devices.
USB Flash Drive Type
(Auto default)
Determines the emulation type for a USB flash drive. Hard disk allows the USB flash drive to act as a hard drive. Floppy allows the
USB flash drive to act as a removal diskette drive. Auto automatically chooses an emulation type.
Integrated Devices
See Integrated Devices Screen.
PCI IRQ Assignment
Displays a screen to change the IRQ assigned to each of the integrated devices on the PCI bus, and any installed expansion cards
that require an IRQ.
Serial
Communication
(Off default)
Options are On with Console Redirection via COM2, and Off.
Failsafe Baud Rate
(57600 default)
Displays the failsafe baud rate used for console redirection when the baud rate cannot be negotiated automatically with the remote
terminal. This rate should not be adjusted.
Remote Terminal
Type
(VT 100/VT 220
default)
Select either VT 100/VT 220 or ANSI.
Redirection After
Boot
(Enabled default)
Enables or disables BIOS console redirection after your system boots to the operating system.
Embedded Server
Management
Displays a screen to configure the front-panel LCD options and to set a user-defined LCD string. For more information, see the
systems management software documentation that describes the features, requirements, installation, and basic operation of the
embedded software.
System Security
Displays a screen to configure the system password and setup password features. See System Security Screen, Using the System
Password, and Using the Setup Password for more information.
Keyboard NumLock
(On default)
Determines whether your system starts up with the NumLock mode activated on 101- or 102-key keyboards (does not apply to 84-key
keyboards).
Report Keyboard
Errors
(Report default)
Enables or disables reporting of keyboard errors during the POST. Select Report for host systems that have keyboards attached.
Select Do Not Report to suppress all error messages relating to the keyboard or keyboard controller during POST. This setting does
not affect the operation of the keyboard itself if a keyboard is attached to the system.
Vista de pagina 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 80 81

Comentarios a estos manuales

Sin comentarios