Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) El manual del propietario descargar pdf (Pagina 38)



3. Slide the daughter card tray towards the sideplane until the edge connector on the daughter card fits into the socket on the sideplane board and the

release latch engages. See Figure3-8.

Figure 3-8. Installing a SAS Controller Daughter Card



4. Attach any cables from the internal storage daughter card to the backplane, referring Figure3-9 for the cabling guidelines for your system's card and

backplane configuration.

Figure 3-9. Cable Routing for the SAS RAID Controller Daughter Card



RAID Battery



Installing a RAID Battery



1. Locate the RAID battery pocket on the chassis that is adjacent to hard drive bay 0. See Figure3-10.



2. Insert the battery in the battery pocket.



SAS controller daughter card and

tray assembly

sideplane

daughter card socket

release latch

RAID battery connector

RAID memory module

(DIMM)

SAS RAID connector 0 (to

backplane SAS A)

alignment slots in card

tray (2)



NOTICE: You must follow the cabling diagrams for connecting the hard drives to either of the internal storage daughter cards that are illustrated in the

following figures to ensure proper connection. Figure3-9 illustrates the cable routing for the SAS RAID controller daughter card.

SAS RAID connector

SAS 0

SAS RAID controller daughter

card

SAS backplane connector

SAS A