Dell PowerEdge FX2/FX2s Manual de usuario Pagina 116

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 462
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 115
To display the currently configure dynamic IP address and lease time, enter the
show ip dhcp lease command.
show ip dhcp client statistics
Displays DHCP client statistics, including the number of DHCP messages sent and received on an
interface.
Syntax
show ip dhcp client statistics interface type slot/port
Parameters
interface type
slot/port
Display DHCP client statistics on the specified interface.
For the management interface on the stack-unit, enter
the keyword managementethernet followed by slot/
port information. The slot and port range is 0.
For a VLAN, enter the keyword vlan followed by a
number from 1 to 4094.
Command
Modes
EXEC Privilege
Default None.
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
show ip dhcp lease
Displays lease information about the dynamic IP address currently assigned to a DHCP client-enabled
interface.
Syntax
show ip dhcp lease[interface type slot/port]
Parameters
interface type
slot/port
Display DHCP client statistics on the specified interface.
For the management interface on the stack-unit, enter
the keyword managementethernet followed by slot/
port information. The slot and port range is 0.
For a VLAN, enter the keyword vlan followed by a
number from 1 to 4094.
Command
Modes
EXEC Privilege
Default Display DHCP lease information on all DHCP client-enabled interfaces on the
switch.
116
Vista de pagina 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 461 462

Comentarios a estos manuales

Sin comentarios