Dell PowerEdge FX2/FX2s Manual de usuario Pagina 381

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 462
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 380
The dcb-map command is supported only on physical Ethernet interfaces.
To remove a DCB map from an interface, enter the no dcb-map map-name
command in Interface configuration mode.
Related
Commands
show qos dcb-map– displays the dcb-map profiles configured on the system.
dcb-map stack-unit all stack-ports all– applies a DCB map on all ports of a switch
stack.
description (for FCoE maps)
In an FCoE map, add a text description of the FCoE and FC parameters used to transmit storage traffic
over an FN 2210S Aggregator NPIV proxy gateway in a converged fabric.
Syntax
description text
Parameters
text Enter a maximum of 32 characters.
Defaults None
Command
Modes
FCOE MAP
Command
History
Version 9.6(0.0) Supported on the FN 2210S Aggregator.
Usage
Information
The text description is displayed in show fcoe-map command output.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
FCoE maps.
feature fc
Enables the Fibre channel communication via the NPG functionality.
Syntax
feature fc
Command
Modes
CONFIGURATION
Default Enabled
Command
History
Version 9.6(0.0) Supported on the FN I/O aggregator.
Usage
Information
The command is supported only in FN2210S Aggregator.
381
Vista de pagina 380
1 2 ... 376 377 378 379 380 381 382 383 384 385 386 ... 461 462

Comentarios a estos manuales

Sin comentarios