Dell PowerEdge FX2/FX2s Manual de usuario descargar pdf (Pagina 400)

100

101

Commands

service-queue — assigns a class map and QoS policy to different queues.

policy-aggregate — allows an aggregate method of configuring per-port QoS

using policy maps.

service-policy output — applies an output policy map to the selected interface.

qos-policy-output

Create a QoS output policy.

Syntax

qos-policy-output qos-policy-name

To remove an existing output QoS policy, use the no qos-policy-output qos-

policy-name

command.

Parameters

qos-policy-

name

Enter your output QoS policy name in character format (32

characters maximum).

Defaults none

Command

Modes

CONFIGURATION

Command

History

Version 9.4(0.0) Supported on the FN I/O aggregator.

Usage

Information

To specify the name of the output QoS policy, use this command. After the output

policy is specified, rate-limit, bandwidth-percentage, and WRED can be defined.

This command enables Qos-Policy-Output Configuration mode — (conf-qos-

policy-out).

Commands

bandwidth-percentage — assigns weight to the class/queue percentage.

rate-shape

Shape the traffic output on the selected interface.

Syntax

rate shape [kbps] rate [burst-KB]

Parameters

kbps Enter the keyword kbps to specify the rate limit in Kilobits

per second (Kbps). Make the following value a multiple of 64.

The range is from 0 to 40000000. The default granularity is

Megabits per second (Mbps).

rate Enter the outgoing rate in multiples of 10 Mbps. The range is

from 10 to 10000.

burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to

10000. The default is 50.

400

1 2 ... 395 396 397 398 399 400 401 402 403 404 405 ... 461 462

Comentarios a estos manuales

Sin comentarios

Dell PowerEdge FX2/FX2s Manual de usuario Pagina 400

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell PowerEdge FX2/FX2s