Dell PowerEdge FX2/FX2s Manual de usuario Pagina 146

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 462
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 145
auto-negotiation disabled speed 100
auto-negotiation enabled speed 100
auto-negotiation disabled speed 100
Link Status Between Port 1 and Port 2
Up at 1000 Mb/s
Up at 100 Mb/s
Up at 100 Mb/s
Down
Down
* You cannot disable auto-negotiation when the speed is set to 1000 or auto.
Related
Commands
speed (for 1000/10000 interfaces) — sets the link speed to 10, 100, 1000 or auto-
negotiate the speed.
show config (INTERFACE mode)
Displays the interface configuration.
Syntax
show config
Command
Modes
INTERFACE
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell(conf-if)#show conf
!
interface TenGigabitEthernet 0/7
no ip address
switchport
no shutdown
Dell(conf-if)#
show config (from INTERFACE RANGE mode)
Display the bulk configured interfaces (group).
Syntax
show config
Command
Modes
CONFIGURATION INTERFACE (conf-if-range)
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
146
Vista de pagina 145
1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 461 462

Comentarios a estos manuales

Sin comentarios