Dell PowerEdge FX2/FX2s Manual de usuario descargar pdf (Pagina 176)

100

101

pipe-number

Enter the number of the Port-Pipe number. The range is

from 0 to 0.

ip-address

mask [longer-

prefix]

(OPTIONAL) Enter the IP address and mask of a route to

CAM entries for that route only.

Enter the keyword longer-prefixes to view routes with a

common prefix.

detail

Enter the keyword detail to display the group index ID

used by the ecmp routes int he CAM.

member-info Enter the keyword member-info to display the group index

used by the ecmp, the number of egress ports (members) for

the ecmp, and the port details of each member. The detail

information under

member-info will give the MAC address,

VLAN ID and gateway of every member port of the ecmp.

summary (OPTIONAL) Enter the keyword summary to view a table

listing route prefixes and the total number routes which can

be entered in to CAM.

Command

Modes

• EXEC

• EXEC Privilege

Command

History

Version 9.4(0.0) Supported on the FN I/O aggregator.

Usage

Information

The following describes the show ip fib stack-unit command shown in the

following example.

Field Description

Destination Displays the destination route of the index.

CG Displays 0.

V Displays a 1 if the entry is valid and a 0 otherwise.

C Displays the CPU bit.

1 indicates that a packet hitting this entry is forwarded to the

control processor, depending on Egress port.

V Id Displays the VLAN ID. If the entry is 0, the entry is not part of

a VLAN.

Mac Addr Displays the next-hop router’s MAC address.

Port Displays the egress interface. Use the second half of the

entry to determine the interface. For example, in the entry

17cl CP, the CP is the pertinent portion.

176

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 461 462

Comentarios a estos manuales

Sin comentarios

Dell PowerEdge FX2/FX2s Manual de usuario Pagina 176

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell PowerEdge FX2/FX2s