Dell PowerEdge FX2/FX2s Manual de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 462
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
The hostname is used in the prompt.
ip telnet server enable
Enable the Telnet server on the switch.
Syntax
ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults Enabled
Command
Modes
CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
ip telnet source-interface
Set an interface’s IP address as the source address in outgoing packets for Telnet sessions.
Syntax
ip telnet source-interface interface
Parameters
interface Enter the following keyword and slot/port or number
information:
For VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults The IP address on the system that is closest to the Telnet address is used in the
outgoing packets.
Command
Modes
CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Related
Commands
telnet — telnets to another device.
55
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 461 462

Comentarios a estos manuales

Sin comentarios