Dell PowerEdge FX2/FX2s Manual de usuario descargar pdf (Pagina 302)

100

101

• tlv: enables traces for DCBX TLVs.

Defaults none

Command

Modes

EXEC Privilege

Command

History

Version 9.4(0.0) Supported on the FN I/O aggregator. This command is

supported in Programmable-Mux (PMUX) mode only.

fcoe-map

Create an FCoE map which contains the parameters used to configure the links between server CNAs

and a SAN fabric. Apply the FCoE map on a server-facing Ethernet port.

Syntax

fcoe-map map-name

Parameters

map-name Maximum: 32 alphanumeric characters.

Defaults On the FN2210S Aggregator with PMUX modules, the following parameters are

applied on all the PMUX module interfaces:

• Description: SAN_FABRIC

• Fabric-id: 1002

• Fcoe-vlan: 1002

• Fc-map: 0x0efc00

• Fcf-priority: 128

• Fka-adv-period: 8000mSec

• Keepalive: enable

• Vlan priority: 3

Command

Modes

CONFIGURATION

INTERFACE

Command

History

Version 9.6(0.0) Supported on the FN2210S Aggregator with the PMUX

module.

Version 9.3(0.0) Introduced on the M I/O Aggregator with the PMUX module.

Usage

Information

An FCoE map is a template used to map FCoE and FC parameters in a converged

fabric. An FCoE map is used to virtualize upstream FC ports on an FN2210S

Aggregator with the PMUX module NPIV proxy gateway so that they appear to

downstream server CNA ports as FCoE forwarder (FCF) ports on an FCoE network.

When applied to FC and Ethernet ports on an NPIV proxy gateway, an FCoE map

allows the switch to operate as an FCoE-FC bridge between an FC SAN and an

302

1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 461 462

Comentarios a estos manuales

Sin comentarios

Dell PowerEdge FX2/FX2s Manual de usuario Pagina 302

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell PowerEdge FX2/FX2s