Dell PowerEdge FX2/FX2s Manual de usuario descargar pdf (Pagina 169)

100

101

• For the management interface, enter the keyword

ManagementEthernet then the slot/port information.

The slot range is 0 and the port range is 0.

• For a 10 Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

• For VLAN, enter the keyword vlan then by a number

from 1 to 4094.

count value (OPTIONAL) Enter the keywords count then the count value.

The ranges from 1 to 65534. The default is Infinity.

Command

Modes

EXEC Privilege

Command

History

Version 9.4(0.0) Supported on the FN I/O aggregator.

Usage

Information

To stop packets from flooding the user terminal when debugging is turned on, use

the count option.

Example

ICMP: echo request rcvd from src 40.40.40.40

ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply

ICMP: echo request sent to dst 40.40.40.40

ICMP: echo request rcvd from src 40.40.40.40

ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply

ICMP: echo request sent to dst 40.40.40.40:

ip route

Assign a static route to the switch.

Syntax

ip route destination mask {ip-address | interface [ip-address]}

[distance]

To delete a specific static route, use the no ip route destination mask

{address | interface [ip-address]}

command.

To delete all routes matching a certain route, use the no ip route

destination mask command.

Parameters

destination Enter the IP address in dotted decimal format of the

destination device.

mask Enter the mask in the slash prefix format (/x) of the

destination device’s IP address.

ip-address Enter the IP address in dotted decimal format of the

forwarding router.

169

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 461 462

Comentarios a estos manuales

Sin comentarios

Dell PowerEdge FX2/FX2s Manual de usuario Pagina 169

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell PowerEdge FX2/FX2s