Dell PowerEdge FX2/FX2s Manual de usuario descargar pdf (Pagina 97)

100

101

Usage

information

If you do not use the statistics parameter, both hardware and DCBx counters

clear.

dcb enable auto-detect on-next-reload

Enables or disables global DCB on a subsequent reload. This command also internally configures PFC

buffers based on DCB enable/disable. Save and reload is mandatory for the configurations to take effect.

Auto-detect keyword can be used to re-enable IOA with port wise DCB auto detect feature.

Syntax

dcb enable [auto-detect | on-next-reload]

To disable global DCB on a subsequent reload, use the no dcb enable on-

next-reload command.

Parameters

auto-detect Enter the keywords auto-detect to re-enable the

Aggregator with port wise DCB auto detect feature.

on-next-reload Enter the keywords on-next-reload to apply DCB

configurations on subsequent reload.

Defaults DCB is globally enabled with auto-detect feature.

Command

Modes

• CONFIGURATION

Command

History

Version 9.4(0.0) Supported on the FN I/O aggregator.

Example

(Disable)

Dell#show dcb stack-unit 0 port-set 0

stack-unit 0 port-set 0

DCB Status: Enabled, PFC Queue Count: 4

stack-unit Total Buffer PFC Total Buffer PFC Shared Buffer PFC

Available Buffer

PP (KB) (KB)

(KB) (KB)

---------------------------------------------------------------

-------------------

0 0 3822 1912 832

450

Dell(conf)#

Dell#

Dell#conf

Dell(conf)#no dcb enable on-next-reload

Dell(conf)#end

Dell#

Dell#write memory

Mar 18 00:21:49: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied

running-config to startup-config in flash by default

Dell#reload

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 461 462

Comentarios a estos manuales

Sin comentarios

Dell PowerEdge FX2/FX2s Manual de usuario Pagina 97

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell PowerEdge FX2/FX2s