Dell Chassis Management Controller Version 4.50 Guía de usuario descargar pdf (Pagina 109)

– disabled — Does not allow the virtual disk to use the cache.

– default — Uses the default cache policy. For SAS drives, use the disabled option and

for SATA drives, use the

enabled option by default.

• -name <VD name> — Specifies the name of the virtual disk.

• -size <VD size> — Specifies the size of each virtual disk.

– b — Specifies the size in bytes

– k — Specifies the size in kilobytes

– m — Specifies the size in megabytes

– g — Specifies the size in gigabytes

– t — Specifies the size in terabytes

• -sc — Number of spans in a virtual disk (required for multi-span RAID level).

NOTE:

– The default value for multi-span RAID levels is 2 and for basic RAID levels is 1.

– For hybrid RAID levels such as RAID10 and RAID50, -sc option is mandatory.

– The value for-sc option can be 0 only for RAID10.

– After creating the virtual disk, create a job and to apply the virtual disk configuration,

restart the server operating system.

• -T10PIEnable — Creates a virtual disk with protection information.

• -key <Key id> — Specifies the key id.

• -passwd <passphrase> — Specifies the passphrase.

• -newpasswd <passphrase> — Specifies the new passphrase.

• -assign {yes | no} — Assigns or unassigns the disk as a hot-spare.

• -type { ghs | dhs} — Assigns a global or dedicated hot-spare.

• -vdkey:<VD FQDD> — Assigns the dedicated hot-spare to the specified virtual disk. This

option is required for dedicated hot-spare.

Example

• To generate and view information about the inventory of controllers, virtual disks, storage enclosures, and physical

disk drives.

– To generate and view information about the inventory of storage root node.

This command retrieves the status.

racadm raid get status

Storage Root Node Status : Ok

– To generate and view information about the inventory of controllers connected to the server.

racadm raid get controllers

RAID.Integrated.1-1

This command is an optimized version and displays the full controller objects along with their keys.

racadm raid get controllers -o

RAID.Integrated.1-1Status = Ok

DeviceDescription = Integrated RAID Controller 1

RollupStatus = Ok

Name = PERC H710P Adapter (Embedded)

FirmwareVersion = 21.2.0-0007

DriverVersion = 6.600.18.00

RebuildRate = 30 %

BgiRate = 30 %

CheckConsistencyRate = 30 %

109

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 427 428

Comentarios a estos manuales

Sin comentarios

Dell Chassis Management Controller Version 4.50 Guía de usuario Pagina 109

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Dell Chassis Management Controller Version 4.50