Dell Chassis Management Controller Version 4.50 Guía de usuario descargar pdf (Pagina 42)

Output

• No feature card inserted — Action: To verify that the SD card was properly inserted,

check the CMC. In a redundant CMC configuration, make sure the CMC with the SD feature card

installed is the active CMC and not the standby CMC.

• The feature card inserted is valid and contains the following

feature(s) FlexAddress: The feature card is bound to this

chassis

— Action: No action required.

• No features active on the chassis — Action: Install the SD card into the CMC.

• The feature card inserted is valid and contains the following

feature(s) FlexAddress: The feature card is bound to another

chassis, svctag = ABC1234, SD card SN = 01122334455

Action: Remove the SD card; locate and install the SD card for the current chassis.

• The feature card inserted is valid and contains the following

feature(s) FlexAddress: The feature card is not bound to any

chassis

Action: The feature card can be moved to another chassis, or can be reactivated on the current

chassis. To reactivate on the current chassis, enter racadm racreset until the CMC module

with the feature card installed becomes active.

Example

$ racadm featurecard -s

The feature card inserted is valid, serial number

TEST0123456789012345678

The feature card contains the following feature(s):

FlexAddress: The feature is bound to this chassis

FlexAddressPlus: The feature is bound to this chassis

ExtendedStorage: The feature is bound to this chassis

frontpanelerror

Description Hides or shows the live-feed of the errors currently being displayed on the LCD screen.

This subcommand is applicable only for iDRAC.

For error acknowledge use hide, and error assert use show.

Synopsis

racadm frontpanelerror show

racadm frontpanelerror hide

Input

• show — to view the errors currently being displayed on the LCD screen.

• hide — to hide the errors currently being displayed on the LCD screen.

fwupdate

Description

Allows you to update the firmware on the iKVM, active CMC, standby CMC, server iDRACs or an IOM

infrastructure device. You can:

• Check the firmware update process status.

• Update iDRAC or CMC firmware from FTP or TFTP server by providing an IP address and optional

path.

• Update iDRAC or CMC firmware from the local file system using Local and Remote RACADM.

• Roll back to the standby firmware.

• If CMC firmware version is 2.0 or later and iDRAC firmware version is 1.4, then this subcommand

performs updates to the iDRAC firmware, when the existing firmware is corrupted. There can

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 427 428

Comentarios a estos manuales

Sin comentarios

Dell Chassis Management Controller Version 4.50 Guía de usuario Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Dell Chassis Management Controller Version 4.50