Dell Chassis Management Controller Version 4.50 Guía de usuario Pagina 149

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 148
cfgNicIPv4Enable (Read or Write)
Description
Enables or disables iDRAC or CMC IPv4 stack.
Legal Values
1 (TRUE)
0 (FALSE)
Default
0
cfgNicSelection (Read or Write)
Description Specifies the current mode of operation for the RAC network interface controller (NIC). The table
below describes the supported modes.
This object is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on
Blade Servers or CMC.
Legal Values
1 = Dedicated
2 = LOM1
3 = LOM2
4 = LOM3
5 = LOM4
Default
LOM1 with no failover for iDRAC Express
Dedicated for iDRAC Enterprise
The following table lists the supported cfgNicSelection modes:
Mode Description
Shared
Used if the host server-integrated NIC is shared with the RAC on the host server. This mode enables
configurations to use the same IP address on the host server and the RAC for common accessibility
on the network.
Shared with
failover LOM 2
Enables teaming capabilities between host server LOM2 integrated network interface controllers.
Dedicated
Specifies that the RAC NIC is used as the dedicated NIC for remote accessibility.
Shared with
failover All
LOMs
Enables teaming capabilities between all LOMs on the host server-integrated network interface
controllers.
The remote access device network interface is fully functional when the host operating system is
configured for NIC teaming. The remote access device receives data through NIC 1 and NIC 2, but
transmits data only through NIC 1.
Failover occurs from NIC 2 to NIC 3 and then to NIC 4. If NIC 4 is unsuccessful, then the remote
access device does not succeed over all data transmission back to NIC 1. Only if the original NIC 1
failure has been corrected.
cfgNicVLanEnable (Read or Write)
Description
Enables or disables the VLAN capabilities of the RAC/BMC.
149
Vista de pagina 148
1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 427 428

Comentarios a estos manuales

Sin comentarios