
NOTE:
• -o, -k, -p: These options can be specified for chassis only
• -6: Sets static IPv6 addresses(w/ -soption). Enables autoconfig for IPv6(w/-d option)
disables IPv6(w/
-p option) can be specified for chassis or servers.
• -v: When performing on a switch, release and renew any DHCP lease on that port for
changes to take effect.
Example
• racadm setniccfg -s 192.168.0.120 255.255.255.0 192.168.0.1
• racadm setniccfg -d
• racadm setniccfg -d6
For CMC:
• Configuration of Speed= 100 Mbps and duplex= full duplex.
racadm setniccfg -k 100 full
• Configuration of Speed and Duplex to Autonegotiate.
racadm setniccfg -k
• Configuration of VLAN id and priority of a slot or all blades in a sleeve.
racadm setniccfg -i 5 -v 1000 7
• Configuration of CMC to a static IPv6 address.
racadm setniccfg -m chassis -s -6 2001:DB8::2 64 2001:DB8::1
• Configuration of server to use stateless autoconfiguration address.
racadm setniccfg -m server-1 -d -6
• Configuration of VLAN id and priority for a switch.
racadm setniccfg -m switch-1 -v 1000 7
• Removal of VLAN configuration from a switch.
racadm setniccfg -m switch-1 -v
setractime
Description Sets the date and time on the CMC.
To run this subcommand, you must have the Administrator privilege.
This command is applicable only for CMC.
Synopsis
racadm setractime -d <YYYYMMDDhhmmss.mmmmmmsoff>
racadm setractime -l <YYYYMMDDhhmmss>
racadm setractime -z ?|<timezone>|<timezone-prefix>*
Input
• -d — Sets the time in the string YYYYMMDDhhmmss.mmmmmmsoff, where:
– YYYY is the four-digit year
– MM is the month
– DD is the day
– hh is the hour
– mm is the minute
– ss is the second
124
Comentarios a estos manuales