
This command displays all battery keys connected to the controllers.
racadm raid get batteries --refkey RAID.Integrated.1-1
Battery.Integrated.1:RAID.Integrated.1-1
This command is an optimized and filtered version.
racadm raid get batteries --refkey RAID.Integrated.1-1 -o -p Name
Battery.Integrated.1:RAID.Integrated.1-1
Name = Battery
– To generate and view information about the inventory of virtual disks connected to the controller.
racadm raid get vdisks
Disk.Virtual.0:RAID.Integrated.1-1
This command displays all virtual disk keys connected to the controllers.
racadm raid get vdisks --refkey RAID.Integrated.1-1
Disk.Virtual.0:RAID.Integrated.1-1
This command is an optimized and filtered version.
racadm raid get vdisks -o -p DeviceDescription,OperationalState
Disk.Virtual.0:RAID.Integrated.1-1
DeviceDescription = Virtual Disk 0 on Integrated RAID Controller 1
OperationalState = Not applicable
– To generate and view information about the inventory of storage enclosures connected to the connector.
This command displays all enclosure objects for the connector FQDD.
racadm raid get enclosures -o
Enclosure.Internal.0-1:RAID.Integrated.1-1
Status = Ok
DeviceDescription = Backplane 1 on Connector 0 of
Integrated RAID Controller 1
RollupStatus = Ok
Name = BP12G+EXP 0:1
BayId = 1
FirmwareVersion = 0.0C
SasAddress = 0x5C8CA0A0EB118A00
SlotCount = 24
This command displays all enclosure keys connected to the connectors.
racadm raid get enclosures --refkey RAID.Integrated.1-1
Enclosure.Internal.0-1:RAID.Integrated.1-1
This command is an optimized and filtered version.
racadm raid get enclosures --refkey RAID.Integrated.1-1 -o -p Name
Enclosure.Internal.0-1:RAID.Integrated.1-1
Name = BP12G+EXP 0:1
– To generate and view information about the inventory of physical disk drives connected to the enclosure or
backplanes.
racadm raid get pdisks
Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
This command is an optimized version and displays the full controller objects along with their keys.
racadm raid get pdisks -o
Disk.Bay.0:Enclosure.Internal.0-1:RAID.Integrated.1-1
Status = Ok
DeviceDescription = Disk 0 in Backplane 1 of Integrated
RAID Controller 1
RollupStatus = Ok
Name = Physical Disk 0:1:0
State = Online
OperationState = Not Applicable
PowerStatus = Spun-Up
Size = 278.88 GB
111
Comentarios a estos manuales