Dell Chassis Management Controller Version 4.50 Guía de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
NOTE: iDRAC7 targets are not supported from CMC. To update the iDRAC7 targets, use the CMC
GUI.
CMC version 3.00 accepts IPv4, IPv6 or fully qualified domain names (FQDN) for
both FTP and TFTP servers.
NOTE: You can specify the cmc-active and cmc-standby modules at the same time along with
one or more server-n modules. This option enables the devices to be updated together. This
option is applicable only for CMC.
When you use the server-generation option, the CMC updates all iDRACs of that particular
generation that can be updated.
NOTE: Verify that the update applied to servers for a particular generation has been validated
for all impacted server models.
Output
Displays a message indicating the operation that is being performed.
Example
Upload the firmware image from the TFTP server and start the firmware update.
racadm fwupdate -g -u -a 192.168.0.100 -d firmimg.cmc -m cmc-
active TFTP firmwareate has been initiated. This update process
may take several minutes to complete.
Upload the firmware image from the FTP server and start the firmware update.
racadm fwupdate -f 192.168.0.100 fred password123 -d firmimg.cmc
-m cmc-active
Upload a firmware image from the client and start firmware update.
racadm fwupdate -p -u -d firmimg.cmc
Start IOM infrastructure firmware update.
racadm fwupdate -u -m iominf-1
Update firmware on both the CMCs.
racadm fwupdate -g -u -a 192.168.0.100 -d firmimg.cmc -m cmc-
active -m cmc-standby
Update firmware on multiple servers.
racadm fwupdate -g -u -a 192.168.0.100 -d firmimg.imc -m
server-1 -m server-2 -m server-3
Update firmware on servers of iDRAC generation.
racadm fwupdate -g -u -a 192.168.0.100 -d firmimg.imc -m server-
iDRAC
Update firmware on multiple IOM infrastructure devices.
racadm fwupdate -u -m iominf-4 -m iominf-5 -m iominf-6
Query the status of all firmware targets to be updated.
racadm fwupdate -s -m all
Query the current status of the firmware update process for a particular module.
racadm fwupdate -s -m <module>
Download firmware update file from a specified location on the TFTP server at a specific IP
address.
racadm fwupdate -g -u -a 143.166.154.143 -d <path>
After the image file is downloaded from the TFTP server, the update process begins. When
completed, iDRAC is reset.
Read the status of the firmware update.
racadm fwupdate -s
Cancel a firmware update in progress.
racadm fwupdate –c
For CMC:
45
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 427 428

Comentarios a estos manuales

Sin comentarios