Dell Chassis Management Controller Version 4.50 Guía de usuario Pagina 155

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 154
cfgNicStaticIPv4Enable (Read or Write)
Description
Enables or disables the IPv4 stack.
Legal Values
0 — Disabled
1 — Enabled
Default
1 — Enabled
NOTE: If this object is modified, then the object cfgNicIPv4Enable is also modified.
cfgNicStaticIpAddress (Read or Write)
Description
Returns or sets the current IPv4 address.
NOTE: Only set the current IPv4 address if cfgNicUseDhcp is set to 0(false).
Legal Values
Any Valid IPv4 address
Default
192.168.0.120
cfgNicStaticUseDhcp (Read or Write)
Description
Specifies whether DHCP is used to configure the IPv4 network.
Legal Values
0 — IP Address, subnet mask and gateway are configured on the device.
1 — IP Address, subnet mask and gateway are assigned from the DHCP server.
Default
0 — Do not use DHCP
NOTE: If this object is modified, then the object cfgNicUseDhcp is also modified.
cfgNicStaticNetmask (Read or Write)
Description
Returns or sets the static IPv4 Netmask.
NOTE: Only set the current IPv4 netmask, if cfgNicUseDhcp is set to 0 (false).
Legal Values Any Valid IPv4 Netmask
Default
255.255.255.0
cfgNicStaticGateway (Read or Write)
Description
Returns or sets the static IPv4 address.
Legal Values Any Valid IPv4 address
Default
192.168.0.120
155
Vista de pagina 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 427 428

Comentarios a estos manuales

Sin comentarios