Dell Chassis Management Controller Version 4.50 Guía de usuario Pagina 204

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 203
cfgChassisInRedundancyReserve (Read Only)
Description
Indicates the amount of redundant power (in watts) in reserve that can be utilized in the event if an
AC grid or PSU is unsuccessful. This value is0 if the Redundancy Policy is set to 0 (no redundancy).
Legal Values
0 (disabled)
1 (enabled)
Default
None
cfgChassisInPowerServerAllocation (Read Only)
Description
Indicates (in watts) the cumulative power allocated to servers. There is no default as this parameter
is specific to the particular customer configuration.
Legal Values
None
Default
None
cfgChassisInfrastructureInPowerAllocation (Read Only)
Description
Indicates the estimated cumulative DC output power consumption (in watts), determined from a field
replaceable unit (FRU) on the hardware modules in the chassis.
Legal Values
None
Default
None
cfgChassisTotalInPowerAvailable (Read Only)
Description
Indicates the amount of power (in watts) available for use by the chassis.
Legal Values
None
Default
None
cfgChassisStandbyInPowerCapacity (Read Only)
Description
Indicates the amount of power (in watts) available for powering up any hardware modules that are
either added to the chassis or powered up (if they are already present in the chassis).
Legal Values
None
Default
None
cfgChassisPowerClear (Write Only)
Description
Resets cfgChassisMinPower and cfgChassisMaxPowerCapacity, when set to 1.
Legal Values
None
Default
None
204
Vista de pagina 203
1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 427 428

Comentarios a estos manuales

Sin comentarios