Dell Chassis Management Controller Version 4.50 Guía de usuario descargar pdf (Pagina 157)

cfgRemoteHosts

This group provides properties that allow configuration of the SMTP server for email alerts.

For CMC, this group enables/disables and configures firmware updates, NTP, remote syslogging and SMTP email

alerting. To apply this setting to iDRAC, use the —m option.

Use this object with the config or getconfig subcommands.

To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.

The following sections provide information about the objects in the cfgRemoteHosts group.

cfgRhostsFwUpdateTftpEnable (Read or Write)

Description

Enables or disables iDRAC or CMC firmware update from a network TFTP server.

Legal Values

• 1 (TRUE)

• 0 (FALSE)

Default

cfgRhostsFwUpdateIpAddr (Read] or Write)

Description

Specifies the network TFTP server IPv4 or IPv6 address that is used for TFTP iDRAC or

CMC firmware update operations.

Legal Values

A string representing a valid IPv4 or IPv6 address. For example, 192.168.0.61

Default

For IPv4, it is 0.0.0.0

cfgRhostsFwUpdatePath (Read or Write)

Description

Specifies TFTP path where iDRAC or CMC firmware image file exists on the TFTP server. The TFTP

path is relative to the TFTP root path on the TFTP server.

NOTE: The server may still require you to specify the drive (for example, C:).

Legal Values

A string with a maximum length of 255 ASCII characters.

Default

<blank>

cfgRhostsSmtpServerIpAddr (Read or Write)

Description

The IPv4 or IPv6 address of the network SMTP server. The SMTP server transmits email alerts from

iDRAC or CMC if the alerts are configured and enabled.

Legal Values

A string representing a valid SMTP server IPv4 or IPv6 address. For example: 192.168.0.55.

Default

• For iDRAC: For IPv4, it is 0.0.0.0

• For CMC: localhost.localdomain

157

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 427 428

Sin comentarios

Dell Chassis Management Controller Version 4.50 Guía de usuario Pagina 157