
cfgIpv6StaticLanNetworking
This group is used to configure the IPv6 Static over LAN networking capabilities. This group is applicable only for iDRAC.
cfgIPv6StaticEnable (Read or Write)
Description
Enables or disables the static IPv6 stack.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default
0 — Disabled
NOTE: If this object is modified, then the object cfgIPv6Enable is also modified.
cfgIPv6StaticAddress1 (Read or Write)
Description
Returns or sets the static IPv6 address1.
NOTE: Only set the current IPv4 address if cfgNicUseDhcp is set to 0 (false).
Legal Values
Any IPv6 address
Default
cfgIPv6StaticGateway (Read or Write)
Description
Returns or sets gateway static IPv6 address.
Legal Values Any IPv6 address
Default
cfgIPv6StaticPrefixLength (Read or Write)
Description
The prefix length for static IPv6 address 1.
Legal Values 0–128
Default
64
cfgIPv6StaticAutoConfig (Read/Write)
Description
Enables or disables the static IPv6 AutoConfig option.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default
1 — Enabled
228
Comentarios a estos manuales